Looking for schematic for ICD2

[zoro1]

Re: Schematics for ICD2

zoro1,
you can post the picture like many others did. Click "upload image", then upload your photo, after that you need click a button to copy the link and past the link in your contents.

It took me a while to figure out this. Very powerful.

Sorry...

file too big...

 

[mantiss]

Re: Schematics for ICD2

please can someone tell me where I can find working schematic of IDC2 with USB
regards

 

[ch9fod]

Re: Schematics for ICD2

this is great, but, is this compatible with dspics?

 

[blueroomelectronics]

Re: Schematics for ICD2

this is great, but, is this compatible with dspics?

My design will program the 5V dsPIC30F chips. The Poyto design has the level shifting ICs so it can also program the 3.3V 24F and dsPIC33F chips.

 

[zhoupxa]

Re: Schematics for ICD2

Thanks,I now need thses materials.

 

[funnynypd]

Schematics for ICD2

ICD2 and PICkit2 both support USB, programming and debugging with MPLAB V7.62. PICKit2 is relatively cheaper.

 

[lynnlase]

Schematics for ICD2

thanks

Added after 56 seconds:

BUT I CAN NOT TO DOWNLOAD

 

[vinhttce]

Re: Schematics for ICD2

thanks , your support is so usefull

 

[bcit]

Re: Schematics for ICD2

Here i'm share with you all for an USB ICPS programmer.

 

[umen]

Schematics for ICD2

well, i need it

 

[blueroomelectronics]

Schematics for ICD2

The 3150Schematic.pdf is not an ICD2, it's just another crummy JDM style programmer.
ICD2 schematics are all over the net.

 

[gabo2378]

Re: Schematics for ICD2

i need information of this programer debuguer

 

[blueroomelectronics]

Re: Schematics for ICD2

i need information of this programer debuguer

My site has manuals, schematics etc.

 

[ebrahimpour]

Schematics for ICD2

is this needed to connect dspic30f4011 analog vss and ground for proper programming?

 

[Radgosk]

Re: Schematics for ICD2

Hi
Again some corrections.

Design is working. USB still not tested.

Hope this is final.

j

thanks

 

[DE2IS]

Schematics for ICD2

thanks for sharing guys!

 

[rola23]

Re: Schematics for ICD2

Thanks a lot!

 

[Sokol525]

Schematics for ICD2

Hi all,

i build RS232 ICD2 based on blueroomelectronics design and.. i cant get it working. Everything should be OK but.. schematic and board are fine, voltage values are ok. i just dont get it.

MPLAB give error "ICD0002 Cannot connect" or something like that and when i check MAX232 TTL signal voltage values with oscilloscope it shows only 0.5V drop (5V to 4.5V)?!? Why?!?

PC serial port should be ok because picstart+ and other devices works fine

Can anyone help?

Sorry my bad english..

 

[blueroomelectronics]

Schematics for ICD2

Are you using an ST232 or MAX232 (the MAX232 doesn't like the 10uF caps and may get hot)
I've built a version with 1uF caps on a MAX232 and that seems to help.

Did you also turn off the FIFO buffers and reboot? Is it a USB RS232 port because they can be difficult to get running.

 

[Sokol525]

Schematics for ICD2

I'm using MAX232 and 1uF caps(tryed also 0.1uF and 10uF). FIFO buffers are turned off and it's not usb rs232 port.
I also used 3 different PC's and OS and it still not working.