Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Heat Sink Design

Status
Not open for further replies.

engr_joni_ee

Advanced Member level 3
Advanced Member level 3
Joined
Nov 3, 2018
Messages
822
Helped
2
Reputation
4
Reaction score
7
Trophy points
18
Activity points
6,876
I have designed a heat sink.

The dimensions are shown in attachment. I am bit concerned with the 1.5 mm.
Is that possible to manufacture ?

HeatSink01.jpg


HeatSink011.jpg


HeatSink013.jpg
 

These days, it's very likely that Wakefield has step files. If they are not freely offered on web site, you can kindly ask them.

"Extruding" the 2D footprint from datasheet in a 3D tool should give an acceptable 3D model, b.t.w.
 
These days, it's very likely that Wakefield has step files. If they are not freely offered on web site, you can kindly ask them.

"Extruding" the 2D footprint from datasheet in a 3D tool should give an acceptable 3D model, b.t.w.
Thanks. I made it in Solid Edge.
 

Sorry for coming again. But I don't find the 3D step model file for the given heat sink from Wakefield Thermal website. Kindly let me know if there is any other way to get the step file <link to external web site removed by moderator>. Thanks in advance.
 
Last edited by a moderator:

Yes, there are two ways to get the step file.
Either write an email to Wakefield Thermal, asking for the step file. Or create the step file yourself.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top