Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
If You want to have monotonic converter without missing codes DNL should be between -0.5 and 0.5. For ENOB>N-0.5 (N - number of bits) INL also should be below 0.5 LSB. Every information which You need is in a IEEE 1241 standard.
If You want to have monotonic converter without missing codes DNL should be between -0.5 and 0.5. For ENOB>N-0.5 (N - number of bits) INL also should be below 0.5 LSB. Every information which You need is in a IEEE 1241 standard.
Do you mean that DAC/ADC need to be monotonic when they are used as a feedback element in a feedback system? Can you give me some example application? Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
