What is typical value of INL and DNL of ADC in LSB?

Status
Not open for further replies.
H

hyleeinhit

Member level 3
Joined
Aug 11, 2008
Messages
58
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
U.S.
Activity points
1,697
What is typical value of INL and DNL of ADC in LSB? Thanks.
 

If You want to have monotonic converter without missing codes DNL should be between -0.5 and 0.5. For ENOB>N-0.5 (N - number of bits) INL also should be below 0.5 LSB. Every information which You need is in a IEEE 1241 standard.
 
Last edited:
Good. Thanks!
In what case is a monotonic converter needed and in what case is a monotonic converter needed?

- - - Updated - - -

Dominik Przyborowski said:
If You want to have monotonic converter without missing codes DNL should be between -0.5 and 0.5. For ENOB>N-0.5 (N - number of bits) INL also should be below 0.5 LSB. Every information which You need is in a IEEE 1241 standard.
Click to expand...
 
Last edited:

Hi,

Most of the application needs the the DAC to monotonic. But in specific all the feedback systems needs the feedback element to be monotonic.
 

Do you mean that DAC/ADC need to be monotonic when they are used as a feedback element in a feedback system? Can you give me some example application? Thanks.
yuvan said:
Hi,

Most of the application needs the the DAC to monotonic. But in specific all the feedback systems needs the feedback element to be monotonic.
Click to expand...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…