Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
basically what you should be interested about these values is that Lesser the value of tecnology , faster and low power the device . also have more resources due to less size per transistor.
It is an advanced lithographic node used in volume CMOS semiconductor fabrication. Transistor gate lengths can reach as low as 25 nm on a nominally 65 nm process.
The devices were scaled as the processes reach lower values. A 65nm silicon technology roughly doubles transistor density compared to the previous 90nm generation.
A transistor is generally charectarised by its gate length (L) & gate width (W). Gate length is the distance, an electron has to travel from highly doped Source to Drain. Xnm refers to the gate length.
apprxoximately each lower node technology is "0.7 times the previous technology"
i.e 130 nm, 90 nm, 65 nm and 45 nm
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.