Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Voltage switching regulator feedback path current

Status
Not open for further replies.

dany.1986

Junior Member level 1
Junior Member level 1
Joined
Feb 26, 2010
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,427
Hello, I have got a question about how to calculate the current flowing through the feedback path of a voltage regulator. Is the solution as simple as saying that current flowing through resistors R1 and R2 equals to the voltage output divided by the total value of the resistance (R1+R2)?

switching regulator.jpg


What will be the current at the FBX pin?
 

Pretty much, provided this current is much larger then the current into the feedback pin (Check the datasheet).

Regards, Dan.
 
Thank you. Is there a way to calculate what current flows into the feedback pin or is its value available only from the datasheet?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top