Ahmmed Razu
Advanced Member level 4
- Joined
- Jul 7, 2011
- Messages
- 100
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,298
- Location
- Bangladesh
- Activity points
- 1,968
Hi,
Its just the way the pk2 hex code is packed in the the rar files.
As you can see it loads in with room to spare.
There are many, many versions of the Pk2 clone in this forum, just use the 'search'
Here is my circuit, many other similar ones in this forum with a pcb design as well.
Can you give me your firmware and device installation process?
I have PicKit2 version 2.61.Will it work with your given firmware if not which version i will use.
Hi Mr. tpetar
very helpful post.The above parallel PIC programmer, will work with 16F series while using winpic800 software?
I have files for PICKIT3 but its more complicated then PICKIT2. :
Hi,
Its just the way the pk2 hex code is packed in the the rar files.
As you can see it loads in with room to spare.
There are many, many versions of the Pk2 clone in this forum, just use the 'search'
Here is my circuit, many other similar ones in this forum with a pcb design as well.
Hi,
Think you can see the values a bit better on this picture, have attached a bmp file which should be clearer.
The Amber led was on my original build but is not really used on a simple clone so was not included in the diagram
The Text reference to C7 should in fact be C6, will change that.
You just download from Microchip and program in the PK2V023200.HEX file, it contains all relevant config details, nothing to add or change.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?