urgent : IBIS model generation

Status
Not open for further replies.

vbhupendra

Full Member level 4
Joined
May 11, 2005
Messages
235
Helped
15
Reputation
30
Reaction score
10
Trophy points
1,298
Location
GOA, INDIA
Activity points
3,219
How can i generate IBIS model ver 4.1 using hspice ? any document ?

Need to generate IBIS model for our digital IC. I do
not have IBIS models for the IO drivers used in the
chip. I have spice model & CDL netlist for the IO drivers.
I also have package parasitics (R,L,C) for each pin.
 

There is a s2ibis software by North Carolina State University to do so. It will automatically run hspice and convert the V/I characteristics into IBIS format. Check out the software here.

**broken link removed**
 

Thanks for your interest in IBIS! Are there particular IBIS 4.1 features that you need (for example, links to Verilog-AMS or VHDL-AMS)? Please keep in mind that most SPICE-to-IBIS conversion tools including S2IBIS3, will only generate "classic" IBIS 3.2 constructs and not *-AMS links or even IBIS 4.0 additions.

As a side-note, I recommend ICM 1.1 for distributing the package information.

I hope this helps!

- Michael Mirmak
Intel Corp.
Chair, EIA IBIS Open Forum

http://www.eigroup.org/ibis/
**broken link removed**
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…