Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

thermal noise in mosfets operating in the triode region

Status
Not open for further replies.
M

mince

Member level 5
Member level 5
Joined
Feb 19, 2005
Messages
82
Helped
10
Reputation
20
Reaction score
4
Trophy points
1,288
Location
Texas
Activity points
1,894
For a mosfet in saturation the thermal noise is i^2 = 8/3*kT*gm. What is it in the triode region? Do you just treat it as a resistor such that i^2 = 4kT/Rds?
 

I guess it's 4kT/gm instead of 4kT/Rds.
 

yes, treat it as
i^2 = 4kT/Rds
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top