Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

The books writed by Razavi and the book writed by Alle

Status
Not open for further replies.

wjxcom

Full Member level 5
Full Member level 5
Joined
Sep 7, 2005
Messages
283
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,298
Activity points
3,862
There have a difference in the books writed by Razavi and the book writed by Alle. Both these two book discuss Miller compensate, but there have a difference that puzzles me.

In the book writed by Allen, the equation 6.2-54 explain that the second pole P2 increase Gm multiply Rds, where Rds is the channel resister of M8.
but in the book writed by Razavi, the equation 10.43 explain that the second pole wp2 increase Gm multiply Rs, where Rs is the output resister of the first stage OP.

so I think this is a problem.
 

Hi,

So which one of them is right?
 

sorry, I do not know which on is right either
 

The fast way to check which one is right is to simulate the circuit hsing spice . Then , you can find the answer easily.

Added after 1 minutes:

The fast way to check which one is right is to simulate the circuit hsing spice . Then , you can find the answer easily.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top