service manual for Panasonic NV-DS60EG

montolivo · Mar 12, 2008

panasonic nv ds30 instructions

oh good this forum

obnoxia · Mar 25, 2008

nv ds60 viewfinder connection

I have red flashing light problem too, trying to fix it now

Added after 1 minutes:

dufinc said:
I have solved the blinking LED problem, the 2 or 3 blinks every 2.5 second means that there is a Reel lock situation. ,-- but it is a "false" message.
The real problem is the T and S reel detector cable (FPC flatcable), probably because of so called Fretting, the signal cable looses contact to the FPC connector.
To solve this Bl.... annoying problem, remove carefully the bottom cover on your NV-DS60, carefully rock the cable 1 mm in and out of the connector a few times, ----- voila the problem disappears. I have attached two pictures, one showing the T(arget) and S(ource) reels, and another pointing out the connector location.
Lars Hansen, 06-2006

will try that thanks

timojk · Apr 3, 2008

panasonic nv black screen error

Hi!

I again tried (after some time now) to check old recordings from dv-tapes with by nv-ds30. But camera started to chew some tape and the camera did actually warn me by flashing the light so there must have been some problems with reels.

Need to dig into the manual and see if there is something I could do.

deuxxx · Apr 26, 2008

troubleshooting s reel lock

Hi,

Thanx for info!

minidv · May 20, 2008

panasonic repair parts for camcorder nv-ds30

I need serive manual for nv-ds60! i cant download file from here, i have no enough points, What can I do?

oestas · May 21, 2008

panasonic nv-vp25 error

The tape stop after 3 secons.
I saw a INDEX message on screeen?
Can you help me?
Sorry for my bad English

Added after 39 minutes:

shanda said:
Hi,

I have a Panasonic NV-DS30 and the power light flashes. I can see images on the display but can not record. I can not even play the tapes. Any idea what wrong. I have the original manual but there nothing about flashing power light.

I have the same problem.

timojk · May 22, 2008

panasonic nv-ds15eg service manual

Hi!

Warning! When the power led starts to flash and anything doesn't work immediatelly remove your tape in order to save your tape. Panasonic service takes care of these problems so take your peace to the service asap.

Service guys said that this problem is just not with panasonic but also other labels.

Strauss · Jul 12, 2008

panasonic nv-md10000gc blinking power light

Hi.
Please I need service manual for Panasonic NV-DS60EG

Best Regards.
Staruss

Supreme_Being · Jul 20, 2008

service blink codes panasonic

dufinc said:
I have solved the blinking LED problem, the 2 or 3 blinks every 2.5 second means that there is a Reel lock situation. ,-- but it is a "false" message.
The real problem is the T and S reel detector cable (FPC flatcable), probably because of so called Fretting, the signal cable looses contact to the FPC connector.
To solve this Bl.... annoying problem, remove carefully the bottom cover on your NV-DS60, carefully rock the cable 1 mm in and out of the connector a few times, ----- voila the problem disappears. I have attached two pictures, one showing the T(arget) and S(ource) reels, and another pointing out the connector location.
Lars Hansen, 06-2006

Thank you so much!

jj75 · Aug 10, 2008

panasonic nv-ds60 red flashing

Hi - just want to say THANK YOU!
After taking off the bottom cover and having a little fiddle with the connector cable, all is now fixed!
Excellent advise - thank you again!!
Julie

munaim · Sep 28, 2008

panasonic nv-ds60 power blinking

Hi. I have all the panasonic service manuals for digital cameras and more. Contact me if you are interested at servicemanual2000@gmail.com.

Byebye!

Dejanp · Jan 19, 2009

panasonic nv-sd10a error

HI i HAVE exactly
the same problem with my panasonic HV-DS60EG .... can anyone help me because i pissed off ....plsss

fredski · May 6, 2009

panasonic nv-ds60 error codes

Had the LED blinking once every 2.5 seconds on NV- DS60. I had a fiddle with the T and S reel detector cable as described by dunfinc, and now camera works ok. Thanks dunfinc for info and photos.

rajeshkk · May 27, 2009

panasonic nv-gs400 push reset switch

here is simple manual DS60

hans2020 · Nov 22, 2010

Re: panasonic nv-ds30 fault codes

dufinc said:
I have solved the blinking LED problem, the 2 or 3 blinks every 2.5 second means that there is a Reel lock situation. ,-- but it is a "false" message.
The real problem is the T and S reel detector cable (FPC flatcable), probably because of so called Fretting, the signal cable looses contact to the FPC connector.
To solve this Bl.... annoying problem, remove carefully the bottom cover on your NV-DS60, carefully rock the cable 1 mm in and out of the connector a few times, ----- voila the problem disappears. I have attached two pictures, one showing the T(arget) and S(ource) reels, and another pointing out the connector location.
Lars Hansen, 06-2006

It worked. My Panasonic NV-DS60EG have been flashing a red light. I just opened the bottom and adjusted some of the connectors as described by dufnic and it now works as before. Thanks for the information here guys.

Isidore Cat · Dec 28, 2010

Regards and good New Year to Everybody: also I am a new entry!

Do excuse me, does someone know where I can find the sw of editing (VW-DTM20E) for the NV-DS60EG? :?: It seems that cannot be found! :???:

Isidore Cat · Jan 12, 2011

I answer to myself: the program Motion DV Studio contained in the cd VW-DTM20E can be found it to this :arrow: address:
:wink:

Isidore Cat · Jan 13, 2011

Isidore Cat said:
I answer to myself: the program Motion DV Studio contained in the cd VW-DTM20E can be found it to this :arrow: address:
:wink:

Unfortunately I have ascertained that the version of MotionDVStudio suitable to the operation with the door firewire is the 3.0 while in the link that I have posted there is the 6.0.what it works only with door USB.... The continuous search.

Isidore Cat · Jan 16, 2011

Isidore Cat said:
Unfortunately I have ascertained that the version of MotionDVStudio suitable to the operation with the door firewire is the 3.0 while in the link that I have posted there is the 6.0.what it works only with door USB.... The continuous search.

I have found the **broken link removed** of MotionDV Studio 3 but I don't succeed to downloading the program. Does someone know how to do it?

p314 · May 14, 2012

Re: panasonic nv-ds60eg index problem

shanda said:
Hi,

I have a Panasonic NV-DS30 and the power light flashes. I can see images on the display but can not record. I can not even play the tapes. Any idea what wrong. I have the original manual but there nothing about flashing power light.

Two red flashes mean S-reel lock "false" code - see Lars Hansen message above. I have a NV-DS29 ( which is almost identical to NV-DS30) with the same problem but rather dismantling and rocking the FPC cable I slapped the camera twice on the bottom and now it works now! The slaps probably restored the cable connection. If it stops working again I'll take it apart and jiggle the cable connector.

service manual for Panasonic NV-DS60EG

Newbie level 1

Newbie level 1

Newbie level 2

Newbie level 1

Newbie level 1

Newbie level 1

Newbie level 2

Newbie level 1

Newbie level 1

Newbie level 1

Banned

Newbie level 1

Newbie level 1

Newbie level 3

Newbie level 1

Newbie level 4

Newbie level 4

Newbie level 4

Newbie level 4

Newbie

Similar threads

Privacy & Transparency

Privacy & Transparency