Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Real time clock with DS1307 and PIC12F1822

Status
Not open for further replies.
O

Okba_

Junior Member level 2
Junior Member level 2
Joined
Apr 13, 2015
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
183
The following video shows a DIY real time clock using DS1307 and PIC12F1822 microcontroller. Time and date are displayed on 1602 LCD display, with the help of shift register this display uses only two wires. Time and date can be easily adjusted using two push buttons as shown in the video.

 

hello,


This picture show a LCD display with an I2C interface probably a PCF8754
so the dialogue is trought I2C Bus 2 wires SCL & SDA + power supply => 4 wires
PIC12F1822 is a dip8 MCU !

i suppose the PIC12F1822 use I2C Bus to dialogue with RTC DS1307 and LCD ( with 2 wires)

what is your question ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top