problem when interfacing using Labview

[yviswanathbe]

interfacing using labview

Hi Friends,
I am new to labview environment.
I am doing an interface program Agilent 8593E Spectrum Analyzer using Agilent 82357B USB GPIB converter in Labview Environment.
I have Labview 8.5 Evaluation Software with me.

my problem is:
1) Measurement & Automation wizard is not detected my Agilent USB GPIB converter and the instruments connected to my PC
2) If i place instr Asst icon in the block diagram i am getting an error as
"Measurement&Automation or instrument I/O Assistant is not properly installed"

Please help me to solve this issue.

Thanks in Advance.

Y.Viswanath

 

[pakitos]

check labview books on edaboard there are plenty

 

[vasia_uvi]

Maybe you don't have installed properly the drivers for the AGILENT. Check it out!

 

[kiprono]

If you have installed all the drivers and it is not detecting then the evaluation copy has some limitations

 

[athalyepallavi]

@yviswanathbe...
hi need some help can i get ur mail id or any contact no so i can contact u...
Thanks...
pallavi

 

[yviswanathbe]

Dear athalyepallavi,

yu can contact me @ yviswanathbe@gmail.com.

Bye,

Y.Viswanath