[SOLVED] Problem IUS82 ncsim unable to alloc xxxxxxxxx bytes

[yonehara]

Hi everbody,

I recently have installed IUS82 (base) on my machine and ncvlog, ncvhdl, ncelab are working fine. However when I start simulation with irun or ncsim in order to invoke simvision it starts but does not load the snapshot specified. The output follows as...


ncsim -gui test_blackjack:module
ncsim: 08.20-p001: (c) Copyright 1995-2008 Cadence Design Systems, Inc.
simvision: 08.20-p001: (c) Copyright 1995-2008 Cadence Design Systems, Inc.
unable to alloc 1886352492 bytes

...
then, simvision starts up gui, but empty, without snpashot loaded on gui.

Any help will be really appreciate!!

---------- Post added at 11:49 ---------- Previous post was at 11:42 ----------

Sorry, i forgot to put the message from the command without -gui option. So here we go!

ncsim test_blackjack:module
ncsim: 08.20-p001: (c) Copyright 1995-2008 Cadence Design Systems, Inc.
unable to alloc 1886352492 bytes
ncsim: *F,INTERR: INTERNAL ERROR
Observed simulation time : 0 FS + 0
-----------------------------------------------------------------
The tool has encountered an unexpected condition and must exit.
Contact Cadence Design Systems customer support about this
problem and provide enough information to help us reproduce it,
including the logfile that contains this error message.
TOOL: ncsim 08.20-p001
HOSTNAME: felipe-laptop
OPERATING SYSTEM: Linux 2.6.32-33-generic #68-Ubuntu SMP Fri Jun 17 16:25:19 UTC 2011 i686
MESSAGE: Unexpected signal #6, program terminated (null)
-----------------------------------------------------------------

Help me please!!