Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PortE problem?? PIC18F458

Status
Not open for further replies.
Try this code, it will work.

Code: 
void main()
{
TRISE = 0X03;
PORTE.F2 = 0;
TRISC = 0x08;
CMCON = 0x07;
ADCON1 = 0b10000111;

while(1)
{
if(PORTE.F1 == 1) {
	Delay_ms(150);
		if(PORTE.F1 == 1)
 			PORTE.F2 = 0; //UP
}
if(PORTE.F0 == 1) {
	Delay_ms(150);
		if(PORTE.F0 == 1)
		 	PORTE.F2 = 0; //dn
}
if(PORTC.F3 == 1) {
	Delay_ms(150);
		if(PORTC.F3 == 1) {
			PORTE.F2 = 1; //ok
		}
}
}
}
 

Attachments

  • aboelle.rar
    13.3 KB · Views: 75
  • ss13.jpg
    ss13.jpg
    165.9 KB · Views: 82
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top