Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC to Pic communication Through RF module

Status
Not open for further replies.
Hi,
I have transmitted the temperature value through UART using XBee S1. Now I want to transmit the Wind speed through UART. Can I transmit wind speed and temperature at the same time from the same microcontroller which is pic16F877A because transmitter pin is only one which is pin 25.how to arrange these two quantities. waiting for your reply. Thanks.
 

hi,
You can send both the Temperature and wind speed through Tx Line what you do basically is make a condition for sending either temperature sensor or wind speed,
or send them sequentially
like first send the Temperature's value and then after a small delay send wind speed,

If you have any problem still please ask for the same
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top