Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need Help with Whirlpool Washing Machine D650 SMPS board issue

Status
Not open for further replies.

Dmanna

Newbie level 1
Newbie level 1
Joined
Dec 18, 2017
Messages
1
Helped
0
Reputation
0
Reaction score
1
Trophy points
1
Activity points
12
Help Needed for Whirlpool Washing Machine SMPS board. Machine dead found two resistors burnt R20 and R21. R20 is 1/4W resistance completely burnt out. R21 appears to be 1W burnt. Not sure about the IC LNK304 and other parts.

Need the schematic diagram or any help with the resistance values. Also suggestion what else parts might have gone bad. IC LNK304 appears ok physically as it was replace earlier. I have attached the image of the board its for L1961 Quartz Drive PP6 Washing machine model is D650 Top load automatic.

Waiting for replies from experts.

Regards
Deepak R-20 image.jpgR20-21.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top