Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need help with antenna design

kgfroerer

Newbie
Joined
Jun 27, 2024
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Hello,
I am in the process of building this circuit and need info help with a few things.

The 4of275v capacitors, is it 4 capacitors or one? And how would I connect them to the wire?

Where it says 1/4" gap, do I actually leave a gap between the wires?

What wires would you recommend for the antenna and what comes out of the ignition coil?

Thank you
 

Attachments

  • Screenshot_20240617-124535.jpg
    Screenshot_20240617-124535.jpg
    1.1 MB · Views: 33
4uF is one capacitor. Although if necessary it can be assembled from several lesser values in parallel.
--- Updated ---

The 1/4 inch gap appears to serve as a spark arrester or lightning arrester, confirmed since it goes to wire or rod embedded in soil (earth).
 
Who might you be jamming with this, and be careful as thats not legal in some
countries with significant fines.....

The gap is to purposely create a continuous spark to interfere with communications
systems.


Regards, Dana.
 

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top