manishanand14
Full Member level 4
- Joined
- Sep 3, 2011
- Messages
- 203
- Helped
- 10
- Reputation
- 20
- Reaction score
- 9
- Trophy points
- 1,308
- Location
- Bangalore ,India
- Activity points
- 2,572
I have to build Motor speed controller using Tl494 for my project.
I found this circuit but I have not understood how it will limit the peak current by using Q2N2222 transistor.The function of pin 13 in this ckt is not clear.
I know that
if we apply some reference voltage to pin 13 then we will get alternate outputs at the output pins .
if we ground it we will get parallel outputs.
Someone please explain or suggest another better circuit for this.
I found this circuit but I have not understood how it will limit the peak current by using Q2N2222 transistor.The function of pin 13 in this ckt is not clear.
I know that
if we apply some reference voltage to pin 13 then we will get alternate outputs at the output pins .
if we ground it we will get parallel outputs.
Someone please explain or suggest another better circuit for this.