Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing PIC MCU with LCD Display + DS1307 Real Time Clock + DHT Sensor

Status
Not open for further replies.
O

Okba_

Junior Member level 2
Junior Member level 2
Joined
Apr 13, 2015
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
183
The following video shows the interfacing of PIC16F877A microcontroller with 1602 lcd display and DS1307 real time clock and dht11 digital humidity and temperature sensor.
The ds1307 uses I2C protocol to communicate with the microcontroller and the dht11 uses One-Wire protocol.
The results are displayed on the lcd display.
The circuit schematic is attached.


PIC16F877 LCD DS1307 REAL TIME CLOCK DHT11 SENSOR.png
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top