Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Important parameters of sensor for a hardware design engineer

newbie_hs

Full Member level 2
Full Member level 2
Joined
Mar 4, 2023
Messages
138
Helped
1
Reputation
2
Reaction score
2
Trophy points
18
Visit site
Activity points
1,104
Our IC design team is developing a sensor based on quantum sensing.

My job is to design a signal conditioning circuit for that sensor and send the sensor data to cloud.

As a hardware design person I need to know the below parameters.

Please let me know am I missing anything?

  1. Sensor output type(Current or voltage and its min and max values)
  2. Output is AC or DC,(if AC it's frequency)
  3. Output Variation
  4. Sensor O/P impedance
  5. Sensor operating voltage
May I know your thoughts.
 
Hi,

I doubt they design a sensor without a specificaton .. like trial and error basis.
But if they do: you could go the same way: Just build something and hope it works.

Klaus
 


Write your reply...

LaTeX Commands Quick-Menu:

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top