Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Here in this forum or in the web page of potyos:sumkrnboy said:So where can I find the ICD 2 clone schematics?
sumkrnboy said:I still cannot find schematics for the ICD 2 clone. I've already checked http://www.icd2clone.com/wiki/Main_Page, but it is just pictures of the PCB board.
That's really useful - thanks for that.blueroomelectronics said:Here you go, a PICkit 2 lite schematic. It's the most basic PK2 I could design so it's cheap and simple to build. You'll need to get the bootloader firmware PK2V021000.HEX (comes with MPLAB 7.62 or the PICkit 2 software from Microchip) loaded on the PIC18F2550 first though.
Ah, great.blueroomelectronics said:The BAT41 (on the inductor) is in the old design, you can use a 1N4148 or 1N5817 both will work.
If blueroomelectronics is not bothered about it back, i'd love to have it!!folks said:I want to return the gift (Junebug bare board).
ichilton said:Ah, great.blueroomelectronics said:The BAT41 (on the inductor) is in the old design, you can use a 1N4148 or 1N5817 both will work.
When you say "old design", is there a new version of the PK2 Lite diagram around somewhere - I can only the find one above..?
Thanks
Ian
Added after 1 minutes:
If blueroomelectronics is not bothered about it back, i'd love to have it!!folks said:I want to return the gift (Junebug bare board).
Thanks
Ian
folks said:Hi blueroomelectronics!!
I want to return the gift (Junebug bare board) with another gift.
Would You Like one of this? A STR751 (ARM7) bare board or ICD2 (all smd ,potyo 2) bare board.
These boards arrive me from the PCB house in 10 days
Regards
The said schematic used the same hex as you have mentioned and the circuit is tried, tested, verified and used by thousands of enthusiasts all over the world. The said programmer is compatible with PICkit 2 v2.61. Good luckHi blueroomelectronics ,
I'm looking for a good working ICD2 and i've searched here a lot but i can't decide which one is the best.
In the second page there is a schematic:
" blueroomelectronics_pickit_2_lite_2075.pdf (44.6 KB) "
Would you please tell me whether it works with PICkit 2 v2.61.00 and
PK2V023200.hex firmware or not?
Any other suggestions?
Thanks a lot in advance.