how to install s@nop@sys , cad@ence tool in LINUX7.3 or 8.0

Status
Not open for further replies.

roger

Full Member level 3
Joined
Aug 27, 2003
Messages
162
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,296
Activity points
1,617
As title

I have tried many times,
but failed to restart my computer in version 7.2
did I miss any step?
or I should do some setting before ?

Any one can help me as detail as possible?
 

Please try to explain what did you do in installation step and what/when you have got the error. This would be better for us to help solving your problem. Anyway, a good Cadence installation guide can be found here. **broken link removed**
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

If in RedHat 7.3 or 8.0 platform,How to install the Sy*n@ps*ys 2002.5
and L*D*V4.0?
I tried it a long time!
but when I began to install SCL or EDA tool,It's always skiping installation.
Who can decribe detailed for it?

have a nice day!
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

GoodMan said:
Hi,

If in RedHat 7.3 or 8.0 platform,How to install the Sy*n@ps*ys 2002.5
and L*D*V4.0?
I tried it a long time!
but when I began to install SCL or EDA tool,It's always skiping installation.
Who can decribe detailed for it?

have a nice day!
Click to expand...

Hello there,

I dont know exactely what problems are you encountering during S*y*n*@p*s*y*s instalation. You could try as follows:

unzip the tars into a directory (both common and linux);
edit install.now and comment the lines 51 and 52;
save the modified file;
then run it.

That should work!

Good luck! :wink:
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or


Hi,

I dont know what did you mean?
Please detail it!

When I installed it on Linux 7.3 ,it shown:
WARNING: Invalid platform(s) LINUX. Skipping ...

Select platform(s) to install:
{
LINUX
}
Enter the list of platform(s) to install [LINUX]:
linux

Please help!

have a nice weekend!
 

slow response in virtuoso

I don't know why but virtuoso is dog slow. especially as i add components. Any one else experience this? It is making it unusable. I have redhat 7.3 and installed the NCSU design kit. Please help a brother out here.
 

slow response in virtuoso/composer

urm, well, I can't remember: is virtuoso the schematic capture, or is it composer? Well, my previous post is for the schematic capture part of ic5.0 being slow on redhat 7.3. Any help?
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or



Did you comment the lines in the install script as I said before?? Also, do you have the platform dependent package unzipped into your install directory (aka linux package)?????
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

what's the "platform dependent package" . can you say that more detailly?
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

roger said:
what's the "platform dependent package" . can you say that more detailly?
Click to expand...

Well, from my point of view, for a good installation, you should have the following (as an example):
syn_U-2003.06-SP1_common.tar;
syn_U-2003.06-SP1_linux.tar (this one is the package I was talking about).

Unzip them into a directory, edit the install.now script and comment the line as I said above and it should work fine.... :wink:

Good luck!
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi Atre,

According to you,Unzip these two file to the directory which are common
and linux.
then comment line 51 and 52,below,.
50 if ( "$status" == 0 ) then
51 # set toupper = TRUE
52 # set taz = TAZ
53 endif

right?

have a nice day!
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or


Yes, right... those are the lines... :wink:
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Could you tell me the directory of "syn_U-2003.06-SP1"?
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

I tried many time for it,It still shown invalid platform ...skiping..
why?

my os is linux 7.3.
CPU K7 1.33 G

Could you help me?

best regards,.
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

GoodMan said:
Hi,

I tried many time for it,It still shown invalid platform ...skiping..
why?

my os is linux 7.3.
CPU K7 1.33 G

Could you help me?

best regards,.
Click to expand...

Please look if the are capital letter in the name of the files/directories. If so, please rename them with small ones... If you unzipped them on fat partition (win95 &co) they could gotten capitalized...
I had no problem installing S@n@pSys on RH 7.3. Now I'm usig RH 8.0 and it works fine.

Now, if you unzip them on a linux partition (ex. /tmp) you follow like this (i guess you already did that):
tar -xvf arch_common.tar
tar -xvf arch_linux.tar
./install.now

Hope it works!
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

hello,
I am using syn_2002.05 on linux7.0. but it gives me an error when I try to analyze verilog designs:
Verilog option not available.

Even though VHDL designs work. I have removed LSI features from the license file as suggested by some people. but it still doesn't work. Any suggestions.
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

roger said:
As title

I have tried many times,
but failed to restart my computer in version 7.2
did I miss any step?
or I should do some setting before ?

Any one can help me as detail as possible?
Click to expand...

Ok so try Redhat 7.3 it's good for LDV
Regards
 

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Try to use slackware 9.0 it's fine linux release
I use slack with ldv-syno-modelsim


Gianni
 

The other method for install
1. tar xvf all.tar
2. cd linux
3. tar xvf file.tar
4. modify all file from file.taz to FILE.TAZ
5. run install_now
6. copy linux/file to <install_dir>
7. run install_now

finish intalling.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…