how to install s@nop@sys , cad@ence tool in LINUX7.3 or 8.0

[roger]

As title

I have tried many times,
but failed to restart my computer in version 7.2
did I miss any step?
or I should do some setting before ?

Any one can help me as detail as possible?

 

[Amuro]

Please try to explain what did you do in installation step and what/when you have got the error. This would be better for us to help solving your problem. Anyway, a good Cadence installation guide can be found here. **broken link removed**

 

[GoodMan]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

If in RedHat 7.3 or 8.0 platform,How to install the Sy*n@ps*ys 2002.5
and L*D*V4.0?
I tried it a long time!
but when I began to install SCL or EDA tool,It's always skiping installation.
Who can decribe detailed for it?

have a nice day!

 

[Atre]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

If in RedHat 7.3 or 8.0 platform,How to install the Sy*n@ps*ys 2002.5
and L*D*V4.0?
I tried it a long time!
but when I began to install SCL or EDA tool,It's always skiping installation.
Who can decribe detailed for it?

have a nice day!

Hello there,

I dont know exactely what problems are you encountering during S*y*n*@p*s*y*s instalation. You could try as follows:

unzip the tars into a directory (both common and linux);
edit install.now and comment the lines 51 and 52;
save the modified file;
then run it.

That should work!

Good luck! :wink:

 

[GoodMan]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

If in RedHat 7.3 or 8.0 platform,How to install the Sy*n@ps*ys 2002.5
and L*D*V4.0?
I tried it a long time!
but when I began to install SCL or EDA tool,It's always skiping installation.
Who can decribe detailed for it?

have a nice day!

Hello there,

I dont know exactely what problems are you encountering during S*y*n*@p*s*y*s instalation. You could try as follows:

unzip the tars into a directory (both common and linux);
edit install.now and comment the lines 51 and 52;
save the modified file;
then run it.

That should work!

Good luck! :wink:

Hi,

I dont know what did you mean?
Please detail it!

When I installed it on Linux 7.3 ,it shown:
WARNING: Invalid platform(s) LINUX. Skipping ...

Select platform(s) to install:
{
LINUX
}
Enter the list of platform(s) to install [LINUX]:
linux

Please help!

have a nice weekend!

 

[EleApollo]

recommand you upgrade redhat 9.0

 

[electronlover]

slow response in virtuoso

I don't know why but virtuoso is dog slow. especially as i add components. Any one else experience this? It is making it unusable. I have redhat 7.3 and installed the NCSU design kit. Please help a brother out here.

 

[electronlover]

slow response in virtuoso/composer

urm, well, I can't remember: is virtuoso the schematic capture, or is it composer? Well, my previous post is for the schematic capture part of ic5.0 being slow on redhat 7.3. Any help?

 

[Atre]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

If in RedHat 7.3 or 8.0 platform,How to install the Sy*n@ps*ys 2002.5
and L*D*V4.0?
I tried it a long time!
but when I began to install SCL or EDA tool,It's always skiping installation.
Who can decribe detailed for it?

have a nice day!

Hello there,

I dont know exactely what problems are you encountering during S*y*n*@p*s*y*s instalation. You could try as follows:

unzip the tars into a directory (both common and linux);
edit install.now and comment the lines 51 and 52;
save the modified file;
then run it.

That should work!

Good luck! :wink:

Hi,

I dont know what did you mean?
Please detail it!

When I installed it on Linux 7.3 ,it shown:
WARNING: Invalid platform(s) LINUX. Skipping ...

Select platform(s) to install:
{
LINUX
}
Enter the list of platform(s) to install [LINUX]:
linux

Please help!

have a nice weekend!

Did you comment the lines in the install script as I said before?? Also, do you have the platform dependent package unzipped into your install directory (aka linux package)?????

 

[roger]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

what's the "platform dependent package" . can you say that more detailly?

 

[Atre]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

what's the "platform dependent package" . can you say that more detailly?

Well, from my point of view, for a good installation, you should have the following (as an example):
syn_U-2003.06-SP1_common.tar;
syn_U-2003.06-SP1_linux.tar (this one is the package I was talking about).

Unzip them into a directory, edit the install.now script and comment the line as I said above and it should work fine.... :wink:

Good luck!

 

[GoodMan]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi Atre,

According to you,Unzip these two file to the directory which are common
and linux.
then comment line 51 and 52,below,.
50 if ( "$status" == 0 ) then
51 # set toupper = TRUE
52 # set taz = TAZ
53 endif

right?

have a nice day!

 

[Atre]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi Atre,

According to you,Unzip these two file to the directory which are common
and linux.
then comment line 51 and 52,below,.
50 if ( "$status" == 0 ) then
51 # set toupper = TRUE
52 # set taz = TAZ
53 endif

right?

have a nice day!

Yes, right... those are the lines... :wink:

 

[micro325]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Could you tell me the directory of "syn_U-2003.06-SP1"?

 

[GoodMan]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

I tried many time for it,It still shown invalid platform ...skiping..
why?

my os is linux 7.3.
CPU K7 1.33 G

Could you help me?

best regards,.

 

[Atre]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Hi,

I tried many time for it,It still shown invalid platform ...skiping..
why?

my os is linux 7.3.
CPU K7 1.33 G

Could you help me?

best regards,.

Please look if the are capital letter in the name of the files/directories. If so, please rename them with small ones... If you unzipped them on fat partition (win95 &co) they could gotten capitalized...
I had no problem installing S@n@pSys on RH 7.3. Now I'm usig RH 8.0 and it works fine.

Now, if you unzip them on a linux partition (ex. /tmp) you follow like this (i guess you already did that):
tar -xvf arch_common.tar
tar -xvf arch_linux.tar
./install.now

Hope it works!

 

[s0shinde]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

hello,
I am using syn_2002.05 on linux7.0. but it gives me an error when I try to analyze verilog designs:
Verilog option not available.

Even though VHDL designs work. I have removed LSI features from the license file as suggested by some people. but it still doesn't work. Any suggestions.

 

[verilog_crack]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

As title

I have tried many times,
but failed to restart my computer in version 7.2
did I miss any step?
or I should do some setting before ?

Any one can help me as detail as possible?

Ok so try Redhat 7.3 it's good for LDV
Regards

 

[gianni]

Re: how to install s@nop@sys , cad@ence tool in LINUX7.3 or

Try to use slackware 9.0 it's fine linux release
I use slack with ldv-syno-modelsim


Gianni

 

[Dongbei]

The other method for install
1. tar xvf all.tar
2. cd linux
3. tar xvf file.tar
4. modify all file from file.taz to FILE.TAZ
5. run install_now
6. copy linux/file to <install_dir>
7. run install_now

finish intalling.