How to display a list of device model parameters in cadence?

Status
Not open for further replies.
Y

yonzzan

Junior Member level 3
Joined
Dec 12, 2006
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,522
cadence device parameters

I tried to find out the list in several ways such as looking into the file"tsmc018_tt.scs" in unix and trying to editing the file in EDA. But, it never appeared... Please give me your advice.
 

Re: How to display a list of device model parameters in cade

do u mean by device parameters : gm, gds,vdsat,vth,.............???
 

run the simulation, then go to results->annote->operation points, you will see the parameter.
Or you can use the calculator, then click on "OP", then the device you are interested in, you will see what you want.
 

    V

    Points: 2
    Helpful Answer Positive Rating
Choose Results/Print/DC Operating Points or Results/Print/Model Parameters in Analog Artist. To view DC Operating point u should turn on Save DC Operating Point for DC Analysis.
 

    V

    Points: 2
    Helpful Answer Positive Rating
Re: How to display a list of device model parameters in cade

If you open the device properties you will find out all the spice parameters. But it has to have SPICE parameters because sometimes it is models only for PCB and not for simulation. There is a text file that you can also change or you can create from the begining if you want to have a new model.

D.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…