Maggie888
Newbie level 5
In view of the problem from the stepper motor controller users usually encounter and the reports from the semiconductor IC markets, for example, noise come from the driving, reset zero function, board toast the board ect. We recently have lauched two powerful with high quality, market-focused ic products THB60640AH , now is winning good reputation worldwide and has huge market.
THB6064AH produced by TOSHIBA Semiconductor Co.Ltd of Japan, it is our newly key launched product.
The THB6064AH is a PWM chopper-type sinusoidal micro-step bipolar stepping motor driver IC.
It supports 8 kind of excitation modes and forward/reverse mode and is capable of low-vibration, high-performance drive of 2-phase bipolar type stepping motors using only a clock signal.
Features
Single-chip bipolar sinusoidal micro-step stepping motor driver
Uses high withstand voltage BICD process: Ron (upper + lower)=0.4 (typ.)
Forward and reverse rotation control available
Selectable phase drive (1/2, 1/8, 1/10, 1/16, 1/20, 1/32, 1/40, 1/64 step)
Output monitor pins (DOWN / ALERT)
Equipped with reset and enable pins
Built-in thermal shutdown(TSD) and over-current detection(ISD) circuit
Parameter
High output withstand voltage: VDSS=50 V
High output current: Iout=4.5 A (peak) Packages: HZIP25-P-1.27
Dementions:3.6*1.4*0.5 cm
Weight:9.86g
Website:
Email:yumin2191@163.com
Tel:86-010-82359849
**broken link removed**;**broken link removed**;**broken link removed**;**broken link removed**;**broken link removed**;**broken link removed**
THB6064AH produced by TOSHIBA Semiconductor Co.Ltd of Japan, it is our newly key launched product.
The THB6064AH is a PWM chopper-type sinusoidal micro-step bipolar stepping motor driver IC.
It supports 8 kind of excitation modes and forward/reverse mode and is capable of low-vibration, high-performance drive of 2-phase bipolar type stepping motors using only a clock signal.
Features
Single-chip bipolar sinusoidal micro-step stepping motor driver
Uses high withstand voltage BICD process: Ron (upper + lower)=0.4 (typ.)
Forward and reverse rotation control available
Selectable phase drive (1/2, 1/8, 1/10, 1/16, 1/20, 1/32, 1/40, 1/64 step)
Output monitor pins (DOWN / ALERT)
Equipped with reset and enable pins
Built-in thermal shutdown(TSD) and over-current detection(ISD) circuit
Parameter
High output withstand voltage: VDSS=50 V
High output current: Iout=4.5 A (peak) Packages: HZIP25-P-1.27
Dementions:3.6*1.4*0.5 cm
Weight:9.86g
Website:
Email:yumin2191@163.com
Tel:86-010-82359849
**broken link removed**;**broken link removed**;**broken link removed**;**broken link removed**;**broken link removed**;**broken link removed**