horizontal white lines problem in Hitachi CRT TV..

Status
Not open for further replies.
hello all..
Finally Solved the problem, Problem was R751 (56k ohm in ACL line). Its value was about 500K ohms.. I changed it. Now everything is ok.. Fillay I used betwixt's method to clear the picture ind improve the picture quality. Thank for all that helped me to solve this problem. I have learned lots of things from your replies.. Thank you very very much...

---------- Post added at 11:54 ---------- Previous post was at 11:53 ----------

hello all..
Finally Solved the problem, Problem was R751 (56k ohm in ACL line). Its value was about 500K ohms.. I changed it. Now everything is ok.. Fillay I used betwixt's method to clear the picture ind improve the picture quality. Thank for all that helped me to solve this problem. I have learned lots of things from your replies.. Thank you very very much...
 

I will also find out same problem in samsung crt tv model cb-5081z,
replaced all electro. Capacitors in vertical section & video output supply.
Then after i checked & found that the out put voltage of b-video is >60v...
Is video ic tda6103q will be faulty???
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…