Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS Instantaiation and radiation pattern

Status
Not open for further replies.
P

praveen450

Member level 5
Joined
May 13, 2011
Messages
89
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,957
I have two antenna designs in hfss. I want to include one antenna into other antenna file (instantiate design in cadence). Is there any way to perform this function in hfss?

When we set the boundary in hfss, it computes maxwells equation on this boundary?. If so, the radiation pattern will be reliable only at that boundary or at infinite distance?
 

I did not understand your first question.

Yes, HFSS computes fields on the outer Radiation boundary and then it calculates the Far-field Radiation pattern from the calculated field quantities (on Radiation boundary)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top