Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help regarding the transformer design parameters from a company

Status
Not open for further replies.
No. for a single winding o/p (4 diodes) you need to split it, layer one = 1/2 HV, layer 2 = LV, layer 3 = other half HV, you can put the two HV windings in series ...
 

Easy peasy said:
No. for a single winding o/p (4 diodes) you need to split it, layer one = 1/2 HV, layer 2 = LV, layer 3 = other half HV, you can put the two HV windings in series ...
Click to expand...

I have made the transformer exactly like that. i.e., 18 turns sec, then on top 4 turns prim and then on top 18 sec turns again.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top