Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

GYRO heading/course bus information

Status
Not open for further replies.

hanif

Full Member level 4
Joined
Feb 14, 2007
Messages
203
Helped
44
Reputation
88
Reaction score
30
Trophy points
1,308
Location
Pakistan
Activity points
2,441
ASSALAM O ALAIKUM,

anybody has any information regarding Anschütz (STD 20) course bus like baud rate , data format i.e how heading information presented in it. what i so far understand is this is a type of data transmission of gyro heading/course. i have read its name along with NMEA 0183.

i need this information badly because i a device which is transmitting heading data in this format instead of NMEA and i can't understand it.

is it represented like following (this example is from a Doppler device data format which i decode) or any other format.

Byte 1 S M 12 11 10 9
Byte 2 8 7 6 5 4 3 2 1


S --> SIGN , M = Measurement of gyro , compass , speed
M=000 GYRO M=001 MAGNET COMPASS
bit 1------------------12
0.01 m/s--------------(2^12 * 0.01 )=10.24 m/s

PLEASE HELP. i would be very thankful
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top