Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Difference between 16f877 and 16f877A

Status
Not open for further replies.

mihipihi

Newbie level 1
Newbie level 1
Joined
Feb 2, 2005
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
34
anyone have simple schematic witch elements I must add to microcontroller.
 

difference between 16f877 and 16f877a

what?????????????????
 

16f877a ethernet

This has an internal oscillator, so you shouldn't need anything except to pull MCLR high.
 

16f877 oscillator

jdhar said:
This has an internal oscillator, so you shouldn't need anything except to pull MCLR high.

hellooooo?????????????

have u seen the datasheet of 16F877 ??

i guess not. because it doesnt have an internal oscillator.

and mihipihi would you plz tell what you want to do because your question is headed in no way. a system based on a 16F877 can be a full blown ethernet server and it can also be a simple LED flasher. so the components that should be connected with it depends on what you want to do
 

__config 16f877

jdhar said:
This has an internal oscillator, so you shouldn't need anything except to pull MCLR high.
I'd recommend studying the datasheet:
https://ww1.microchip.com/downloads/en/DeviceDoc/30292c.pdf
The 16F877 has no internal oscillator, so an RC, crystal or resonator and some caps are needed (see datasheet: 12.2 Oscillator Configurations). Don't forget the pullup @ MCLR and an 100nF @ Vdd - that's all.

Btw: 16F877 is obsolete and replaced by 16F877A


Mik
 

16f877 vs 16f877a

i need help

i went to buy 16f877
but i found 16f877A
i have the programmer of 16F877
but some trusted body tolled me there's difference between the
two controllers

i hope some body find a sol. or a schematic for the 16F877A

thanks
 

16f877a vs 16f877

hi nami,

the difference between 16f877 and 16f877A as follows (as far as i know) :

i) 16f877A is an improved version of 16f877 with additional built-in comparator function.
ii) programmer that supports 16f877 might not support 16f877A.
iii) different in __CONFIG register bits for 16f877A and 16f877.

the rest are exactly the same. eg. pins compatibility, voltage supply, crystal oscillator frequency and etc.

however, there are slight different in electrical characteristic of these two ICs. but this does not really matter. :)

hope this help u..


regards
 

16f877a crystal oscillator

Btw: 16F877 is obsolete and replaced by 16F877A

It depends on how you define "obsolete". Both parts
are still in full production, and will continue to be so
in the foreseeable future. The 877A has more features
and is a bit cheaper, so I wouldn't use the 877 for a
new project, but it is still freely available.

Nick
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top