Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST Microwave Studio TLM Question

Status
Not open for further replies.
S

SmokinFishGod

Newbie
Joined
Aug 26, 2021
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
15
I am doing a Hexahedral TLM Simulation in CST and the voltage calculated from the discrete port seems way too high for what I was expecting and I was wondering if anyone had any ideas on how I can fix that. The Input is a double exponential with 25kA at 250ns and the voltage out i am getting is about 1.4*10^7 V and am simulating a cage like wall made out of steel 1010 with a Mu of 1000.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top