si_green
Junior Member level 2
hfss low frequency
That is to say, can hfss simulate the low frequency?
when i simuate the crosstalk of two difference stripline, the hfss always display error,the error is as follow:
[error] Discrete solution setup, process abc3d : Failed to solve the problem due to lack of precision. The likely cause is that the frequency is too low.
I set the parameters of setup: start is 0.1M; stop is 2.2M; step is 0.1M;
could you give some suggestion?
thanks a lot!!!
That is to say, can hfss simulate the low frequency?
when i simuate the crosstalk of two difference stripline, the hfss always display error,the error is as follow:
[error] Discrete solution setup, process abc3d : Failed to solve the problem due to lack of precision. The likely cause is that the frequency is too low.
I set the parameters of setup: start is 0.1M; stop is 2.2M; step is 0.1M;
could you give some suggestion?
thanks a lot!!!