can any one suggest me which software is used for burnig(downloading) 8051

[ckshivaram]

I am able to do it. did you change the hardware model in the software with all option out of 3 options only one will work.
Now i don't have S51 with me. check the COM port, and see no other application is using the same port.

 

[Embedded Partner]

yes i changed everything n checking ......
that software saying time out

 

[ckshivaram]

Please let me know which version you downloaded.... version 4 is stable

 

[Embedded Partner]

i have downloaded proland V5.4
k i ll c V4 and come bck to u

---------- Post added at 10:04 ---------- Previous post was at 09:45 ----------

try proload

proland 4 is not available in free of cost

 

[ckshivaram]

proload version 4 evaluation version

proload41setup.exe - ascentengineers - proload V4.1 - Project Hosting on Google Code

 

[Embedded Partner]

ckshivaram

no use trying
searching
over in that software

 

[ckshivaram]

try to replace the controller with another S51. I am also doing parallely while replying you.. it is detecting my IC

---------- Post added at 18:24 ---------- Previous post was at 18:24 ----------

i did in 3 or 4 versions its working in all versions

 

[Embedded Partner]

try to replace the controller with another S51. I am also doing parallely while replying you.. it is detecting my IC

---------- Post added at 18:24 ---------- Previous post was at 18:24 ----------

i did in 3 or 4 versions its working in all versions

here is my circuitry is it rit?

and also there is no options for sellecting the hex code , how is it

 

[ckshivaram]

only after detecting the IC it will allow you to select hex file

---------- Post added at 18:33 ---------- Previous post was at 18:31 ----------

can you tell me the power supply you are using. V and I rating. No problem in circuit

---------- Post added at 18:34 ---------- Previous post was at 18:33 ----------

replace the controller, check if the supply voltage is coming to controller pin after connecting it to computer port.

check if pin 5 is short in both sides of cable also

 

[Embedded Partner]

that software is not detecting my controller, i hv made proper conectivity in the circuit
same ckt is working for Philips8051 IC by flash magic
but not for ATMEL 8051 IC by using proland software

 

[ckshivaram]

change to another S51 and try... maybe the controller is bad

 

[Embedded Partner]

changed and checked no use
is there any other softwaRE

 

[ckshivaram]

I really wonder about the problem.... as it works for me here in my system.

ok try this

Easy-Downloader V2.0 for ATMEL 89C51/52/55 89S51/52 « Belajar Elektronika dan Informatika