Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Antenna design required ??

Status
Not open for further replies.

ping-pong

Member level 2
Member level 2
Joined
Feb 18, 2004
Messages
52
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
427
Hi,

I am working on a design of RHCP antenna having a minimum gain of 18dBi with a beamwidth of 40-50 degrees. The maximum I can achieve is 12 dBi with 60 degrees beamwith using conical ridged septum polarizer. Can somebody tell me that is there any way to come close to my requirement. Any new antenna or a new configuration would be appreciated. Waiting an early reply
 

You can make a phased array of four of these elements and get about 5 dB more gain. This will about halve your beam width.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top