Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Altium DRC error on copper fill and traces

V

vikash23

Full Member level 2
Joined
Jul 31, 2012
Messages
133
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
2,676
Hi,

I see many errors in my DRC nod on of them is shown in the screenshot.

1701211181780.png


I checked the nets and they are connected . The stackup is set and top layer is set as signal.

Any support is appreciated.

Regards,
Vikash
 
The tracks are different nets. And you've got tracks connected to pads with different nets. That's what the errors are telling you. I don't see any copper fill.

Or, you've got traces of the same net but don't have the "different nets only" constraint selected:

1701214562511.png
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top