[SOLVED] 6v, 4.2mAh Battery charging problem

Status
Not open for further replies.
battery is lead acid type:

Battery is charging now correctly. Now, the voltage of the battery increases to 6.83v.

Output Voltage set to charge the battery = around 7.5v
Voltage Between PIN2 and GND = +7.74v
Voltage Between PIN5 and GND = +7.84v

Voltage Between PIN5 and PIN2 = + 0.08v

*Battery Connected to the Circuit

Pl let me know your suggestion on these readings I got.

thanks.

---------- Post added at 20:38 ---------- Previous post was at 20:32 ----------

If battery is not connected to the Circuit,

the Voltage Between PIN5 and PIN2 = + 0v
 

Nice, good luck with your new charger.

KAK
 

Great thanks to you and all those who are helped me to finish this project successfully. Bye.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…