[PIC] 6 Step Digital Automatic Voltage Stabilizer

[s0y]

sir milan rajik can you post your adc sence section c code .because i am writing a steblizer code but i stuck in adc methode thanks sir

 

[s.r.yadav]

milan.rajik sir can you post your adc sence code .actualy i am writing a code for steblizer but i am stuck in adc sence methode .
Thanks sir

 

[b2rster]

thank sir for my transformer.

 

[milan.rajik]

You didn't mention about the LED ? When should the LED turn ON or OFF ?

 

[b2rster]

Sir
led mention output 240 over

 

[milan.rajik]

What is the adc input voltage when AC input is 240V ?

@S0y

Post your Stabilizer circuit. I will have to see the adc circuit.

 

[b2rster]

sir led is not importance so i remove led from my transformer.

- - - Updated - - -

sir it is top of thread

- - - Updated - - -

https://www.edaboard.com/attachments/107118d1404791171t-my-project.jpg

 

[s0y]

see my adc sence milan.rajik sir

 

[milan.rajik]

What does 5V adc input represent ? 230V, 270V, 300V ?

 

[s0y]

245v=0.60v,200v=0.48,

 

[milan.rajik]

Modify your ADC input circuit such that 300V is represented by 5V. I will then write a code for you. 0.6V for 245V is very less. You will get 0.44V for 180V.

Just drop the AC voltage to 6 or 7 volts and pass through half wave or bridge to get around 4.7 to 5V at adc input for AC 300V.