Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can I do GPIO Programming?

Status
Not open for further replies.
H

HHM

Junior Member level 1
Junior Member level 1
Joined
Feb 6, 2010
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,412
Hi,I have an Android6410(arm11)Board (**broken link removed**).
I dont have any dll for GPIO programming.
I am VB.Net programmer,How can I control GPIO Ports.
Please Tell me How Can I do it?
I am beginner in embedded programming and C++.
 

As ckshivaram mentioned, look on the CDROM.

You should have a BSP (Board Support Package) for Windows CE 6.0 included on the CDROM.

The company also has a download area:



If all else fails, contact Boardcon for the BSP.
 

You can download the program from the Official Site of the .
Even you can get whatever you want from the official site about the broad ,you may have a try.
Reading the broad's handbook will help you get fimiliar with the broad .And here I recommand a book---C++ Primer,which is a very popular with the beginner of C++.
That may be useful for you.
 
Last edited:
  • Like
Reactions: HHM

    H

    HHM

    Points: 2
    Helpful Answer Positive Rating
You will have to create drivers for that and call that drivers from the Application program. I had the same problem. I had a SBC6410 board (from Boardcon) and had WinCE installed in it. After weeks of searching, I found that I had to create stream drivers that can access Hardware Registers of the processor and ultimately, can control the GPIO pins. I have developed drivers for WinCE OS. Here, I have attached the files for drivers. To read more about how to make this and use it, go here :

Windows CE: Using a Driver to Read/Write Hardware Registers

And one other thing, This drivers are for Samsung's S3C6410 processor
 

Attachments

  • GPIOdrv.rar
    16.1 KB · Views: 110
  • Like
Reactions: HHM

    H

    HHM

    Points: 2
    Helpful Answer Positive Rating
Hi,Thanks for your attention,
Please Tell me Whats is Your DRIVER Develpment IDE's Name.
How Can I compile this Example?
 

I used Microsoft Visual Studio as IDE. To compile the driver code, I included it with source code of the WinCE OS and then compiled the OS. And when I loaded the image generated by the compile build, it created a .dll file in the device.
 

Hi,

We are planning to buy a development board for educational purposes (price do not exceed US$ 200).

Can anyone suggest which board of the following two is better?

1- SBC6410 Single board computers : **broken link removed**

2- S3C2440 ARM9 BOARD MINI2440 MIT 7" LCD&TOUCH PANEL 256MB:
**broken link removed**

Or if there is another third board, kindly advice

Thanks & Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top