Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Condutivity of Dongbu0.13um CMOS substrate

Status
Not open for further replies.
R

RFbeginner

Junior Member level 3
Junior Member level 3
Joined
Sep 11, 2005
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,449
substrate 13um

I want to know this info about condutivity and thickness of substrate. thanks.
 

It depend on your what technology and process you use .
The thickness of 300mm wafer is about 650-780um.
the conductivity is different for Bipolar and cMOS TECHNOLOGY.
for cmos tech it mostly use high resistance p- substrate .
for bipolar tech it mostly use low resistance substrate(heavily doped n+/p+).
if you think this helps ,plz press the "help" button.
 
  • Like
Reactions: dtsinh

    D

    dtsinh

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top