Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Different Diodes in CMOS technology?

Status
Not open for further replies.
K

katrin

Full Member level 1
Full Member level 1
Joined
Dec 3, 2005
Messages
98
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
2,200
The design kit (CMOS AMS) provides three different kinds of diodes

1, nwell on Psubstrate
2, p diffusion on Nwell
3, n diffusion on Psubstrate

Now I want to design ESD protection circuit, therefore, i need to implement the diodes
from pad to Vdd and ground.

I am confused about which diode can I select ?

At the same time, the design kit offers just the symbol. but no layout for the diodes. Do I need to draw the layout by myself, or can I ask the foundry for help?
 

Usually, P+/Nwell is used for Vdd-Vss ESD protection diode. For P+/Nwell diode, Nwell tied Vdd and P+ tied gnd, thus there is minimum leadage between Nwell and Psub (tied gnd).
As for layout, you can ask foundry to provide examples.
 

    K

    katrin

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top