Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Unbound Pin problem (Besoin d'aide)

Status
Not open for further replies.
plasma2000

plasma2000

Junior Member level 1
Junior Member level 1
Joined
Feb 14, 2006
Messages
17
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,436
unbound pin

I have tried to draw a simple layout , no problem when I check it against source.

But when I do LVS, I found an "Unbound Pin error", I don't understand. Maybe it's the simulator's bug or sth else?

Thanks for your help! Merci.
 

unbound pin lvs

The LVS tool is not able to identify the 3 pins in layout, but is finding it in schematics. So check the properties of the pin, it should be the pin layer of the respective metal on which u are attaching the pin.

Also, LVS is locating the gnd pin, so u can compare the properties of gnd pin with the other pins.

Hope this is helpful to you..
 

lvs pin unbound error

I got it, thanks.

I had forgetten to change the properties of pins to "pn"
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top