Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Second stage PMOS Common source design problem

Status
Not open for further replies.
Y

yefj

Advanced Member level 5
Advanced Member level 5
Joined
Sep 12, 2019
Messages
1,505
Helped
1
Reputation
2
Reaction score
5
Trophy points
38
Activity points
9,114
Hello,I am designing a two stage amplifier. my first stage amplies 33dB.
On my second stage i have gm=126u rout=105.2||249K=105.2Ohm ,so its not amplifying at all i have -5 gain.
our gain formula is A_2nd=gm*Rout
if we increase PMOS W our gm rises but our Rout gets smaller ,If we have low PMOS rds then it doesnt matter what is the NMOS RDS because it cancels it in parralel.The diagram of my circuit is attached.
How to make the second stage into 30dB amplifier?
Thanks.

1.JPG
 

See the reply to your other post - you cant make a reliable dc operating point in the amplifier unless you provide DC feedback.
 

your upper PMOS is on triode !!!! check VD = 1.79 and your VS = 1.8 !

Fix the dc bias transistor to have 0.9 volt at the output, you will see the gain
 
  • Like
Reactions: yefj

    Y

    yefj

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top