Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

clock osciilator circuit design

Status
Not open for further replies.
K

kcinimod

Member level 3
Member level 3
Joined
Dec 19, 2011
Messages
63
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,714
hi all, i have a VCSO from crystek and i would like to design the circuitry around it (i.e. capacitors and resistors or other necessary components). are there any recommendations on notes i could read or anywhere i could learn to design such a circuit for my application.
 

Dear kcinimod
Hi
Where is your schematic ? if you attach it , we can help you at best way .
Best Wishes
Goldsmith
 

If you use a complete encapsulated clock oscillator, the only required specifications is the DC voltage (usually +5V) and the output type indicated in data sheet. I would only recommend to use a 5 uF capacitor from Vcc to GND. Nothing else is needed to operate the "can".
If the device also has an "enable" input, follow the data sheet. If there is a "tuning voltage" input, again follow the data sheet.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top