Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to measure Rout & Rin using Cadence Analog Design?

Status
Not open for further replies.
richloo

richloo

Full Member level 1
Full Member level 1
Joined
Aug 24, 2004
Messages
95
Helped
9
Reputation
18
Reaction score
4
Trophy points
1,288
Location
Isolated Island
Activity points
748
input resistance measure breadboard

Hi, i am new to cadence software. Can anyone tell me the step to measure input resistance and output resistance of a circuit? Thanks in advance!
 

analog design using cadence

Using calculator. Divide VS/IS for DC analysis, VF/IF for AC analysis, VT/IT for transient analysis. Then plot it.
 
measuring output impedance in cadence

richloo said:
Hi, i am new to cadence software. Can anyone tell me the step to measure input resistance and output resistance of a circuit? Thanks in advance!
Click to expand...

There is no point in discussing input/ouput resistance (better term would be impedance) in DC. So it is AC.

I am not so familiar with what Cadence you are reffering but if you are using OrCAD you can absolutely you can make input/output admitance/impedance vs. frequency.

Please add more info and I guide how. Would be a lot easier in Ansoft Designer or ADS but yes! you can in Cadence OrCAD.

What version?
 
cadence + input + output impedance

In any of the case of what Cadence Product you have here is how you guys can do in cadence OrCAD.

Menu "Spice"
See pictures. Simulation must be AC sweep.
 

how to measure the output impedance orcad

for example; i want to measure the output impedence of bias current source which is made of NMOS, what can i do?
 

measuring input impedance in orcad

As the case i wan to measure i/p and o/p impedance of an amplifier... how can i do that? i mean in Cadence IC50. Or else i have to goto result browser to find the rout for each transistor and write out all the nodal equation... any other fast method?
 

plot output impedance cadence

I do not know in Cadence IC50. I have never used this product. Sorry guys.

What I said for the above is for OrCAD.

I can tell you in also in A g i l e n t A DS and Ansoft Designer.
 

measure input impedance cadence

Hi,

(1). DC Rin and Rout: as what is said in the textbook, using a test voltage source to get the DC current, then R=V/I...

(2). Small signal Zin and Zout: just perform the S-Parameter simulation, no matter the simulator is Cadence or ADS.

Hope this helps.

Ruri
 
  • Like
Reactions: himansg

    richloo

    richloo

    Points: 2
    Helpful Answer Positive Rating
    himansg

    himansg

    Points: 2
    Helpful Answer Positive Rating
measure input resistance

Fom said:
Using calculator. Divide VS/IS for DC analysis, VF/IF for AC analysis, VT/IT for transient analysis. Then plot it.
Click to expand...

Also from the calculator u can draw the real and imaginary parts, each in a separate curve
 

    richloo

    richloo

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top