ZXLD1370 LED driver switching frequency...how to calculate in Buck mode?

Status
Not open for further replies.
T

treez

Guest
The ZXLD1370 LED driver datasheet says that it regulates its switching frequency to 400KHz (bottom of page 5 of datasheet)
However, page 14 of the datasheet states the following……..


**The control loop also regulates the switching frequency by varying the level of hysteresis (the ripple in the inductor current). The hysteresis has a defined minimum (typ 5%) and a maximum (typ 30%).**
Click to expand...


-So what happens when the hysteresis in the inductor current is at 30% (maximum) and yet the frequency is well above 400KHz?…..will the ZXLD1370 allow the inductor current to have more than 30% ripple in that case, in order to bring the switching frequency down to 400KHz?

ZXLD1370 datasheet
**broken link removed**
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…