Gyurex
Newbie level 4
- Joined
- Aug 8, 2013
- Messages
- 6
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 50
Hello!
Recently I bought two zigbee drf1605H module, and two drf2618A uart to usb module. Downloaded the DTK zigbee configurator, and TI sensor monitor. My problem is that, when I try to configure one of these module to router, can't change the Pan id, it's alaways shows FFFE in pan id field. If i configure the second module to Coordinator, and set the FFFE pan id, the TI sensor monitor shows the coordinator, but no connected router.
What could be the problem?
Thanks in advance!
Recently I bought two zigbee drf1605H module, and two drf2618A uart to usb module. Downloaded the DTK zigbee configurator, and TI sensor monitor. My problem is that, when I try to configure one of these module to router, can't change the Pan id, it's alaways shows FFFE in pan id field. If i configure the second module to Coordinator, and set the FFFE pan id, the TI sensor monitor shows the coordinator, but no connected router.
What could be the problem?
Thanks in advance!