[SOLVED] Yamaha RX-V659 Processor not running but looks alive.

Status
Not open for further replies.
Y

Yoritomo

Newbie
Joined
Dec 28, 2024
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
27
Hello everyone.

I am facing a problem with the processor of this amplifier, in normal condition it is not oscillating, when I set the reset pin low (normally high) the processor is oscillating normally after disconnecting the reset circuit , when releasing it comes high again and the processor stop oscillating.

All power lines looks ok, VSS also, I am not so clever in processors and micro-controller topics, but I have solid experience in electronic repairs.
One thing I noticed is the reset circuit cycling and constantly send a reset, I could not find the reason testing the components around the reset circuit itself.

The schematic can be found here on the website of Electrotanya https://elektrotanya.com/showresult?...a=All&kat2=All.

Thanks for you help.
 

Sort by date Sort by votes
I finally found what was the problem, that is weird. I found a non polarized capacitor , C654 which was normally 22nF which dropped to 4.5nF which caused that the power could not insure to supply the correct tension for the chip IC652, a cmos 4013. After replacement with a 400V equivalent , everything works normally again. That was the reason the reset circuit was dizzy , also S10 was abnormal.
 
Last edited:

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…