ganzziani
Newbie level 6
- Joined
- Feb 5, 2007
- Messages
- 12
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,283
- Location
- Palmetto, FL
- Activity points
- 1,345
I'm developing a fully featured, low cost, MSO. Schematics and HEX files available if you want to build your own unit.
**broken link removed**
The Xprotolab is the first mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 1.6" sq. inches, and can be mounted directly on a breadboard. The Xprotolab can also be used as a development board for the AVR XMEGA microcontroller.
General Specifications:
Oscilloscope specifications:
**broken link removed**
The Xprotolab is the first mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 1.6" sq. inches, and can be mounted directly on a breadboard. The Xprotolab can also be used as a development board for the AVR XMEGA microcontroller.
General Specifications:
- ATXMEGA32A4 microcontroller: 32KB Flash, 4KB SRAM, 1KB EEPROM
- Graphic OLED display 0.96", 128x64 pixels, wide viewing angle
- Module size: 1.60" x 1.00"
- PDI interface
- 4 tactile switches
- Micro USB connector for power (Software USB will be a future update)
Oscilloscope specifications:
- 2 Analog Inputs, 8 Digital Inputs
- Maximum Sampling rate: 2MSPS
- Analog Bandwidth: 318kHz
- Resolution: 8bits
- Input Impedance: 1MΩ
- Buffer size per channel: 256
- Max. Input Voltage: +/- 10V
- 1 Analog Output
- Maximum conversion rate: 1MSPS
- Analog Bandwidth: 66kHz
- Resolution: 8bits
- Low output impedance
- Buffer size: 256
- Max. Output Voltage: +/- 2V