microblaze spartan 3e starter kit examples
I have running uClinux on my Spartan-3E Starter Kit.
Linux version 2.4.32-uc0 (muranaka@colinux) (gcc version 3.4.1 ( Xilinx EDK 8.1 Build EDK_I.17 121005 )) #2 Mon Apr 24 00:43:06 JST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
CPU: MICROBLAZE
Kernel command line:
Console: xmbserial on UARTLite
Calibrating delay loop... 32.56 BogoMIPS
Memory: 32MB = 32MB total
Memory: 29868KB available (1134K code, 1402K data, 52K init)
........
s3esk login: root
Password:
# ifconfig eth0 192.168.205.1
# ping 192.168.205.205
PING 192.168.205.205 (192.168.205.205): 56 data bytes
64 bytes from 192.168.205.205: icmp_seq=0 ttl=128 time=8.9 ms
64 bytes from 192.168.205.205: icmp_seq=1 ttl=128 time=2.8 ms
--- 192.168.205.205 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 2.8/5.8/8.9 ms
#
uClinux working stable:
# uptime
20:37:55 up 5 days, 20:37, load average: 0.21, 0.31, 0.22
#
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:00:C0:A3:E5:44
inet addr:192.168.205.1 Bcast:192.168.205.255 Mask:255.255.255.0
UP BROADCAST RUNNING MTU:1500 Metric:1
RX packets:88 357 853 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 829 789 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
Interrupt:1